The Garmin® GPS 35 TracPak is a complete GPS receiver and
embedded antenna designed for a broad spectrum of OEM (Original
Equipment Manufacturers) system applications. Based on the
proven technology found in other Garmin 12–channel GPS
receivers, the GPS 35 will track up to twelve satellites at a
time while providing one-second navigation updates and low power
consumption. Its far-reaching capability meets the sensitivity
requirements of land navigation as well as the dynamics
requirements of high-performance aircraft.
The GPS 35 TracPak design utilizes the latest technology and
high-level circuit integration to achieve superior performance
while minimizing space and power requirements. Utilizing
Garmin's own proprietary chipset, all critical components of the
system including the RF/IF receiver hardware and the digital
baseband are designed and manufactured by Garmin to ensure
outstanding quality and capability.
The GPS 35 TracPak is housed in a black, water-resistant case
and designed to withstand rugged operating conditions. While the
GPS 35 TracPak is designed as a "plug 'n play" GPS solution, the
minimum system must provide a source of power and a clear view
of the GPS satellites. The system may communicate with the GPS
35 via two RS-232 compatible bi-directional communication
channels. Internal memory backup allows the GPS 35 to retain
critical data such as satellite orbital parameters, last
position, date, and time.
Available Versions:
- GPS35-LVC Attached 10 foot
power/data cable with bare wire ends. Accepts power from
unregulated low voltage power supplies between 3.6 and 6 VDC.
Asynchronous serial data interfaces via 2 serial ports with
CMOS voltage level outputs, RS-232 polarity.*
GPS35-LVS Attached 10 foot
power/data cable with bare wire ends. Accepts power from
unregulated low voltage power supplies between 3.6 and 6 VDC.
Asynchronous serial data interfaces via 2 serial ports with true
RS-232 voltage level outputs.*
- GPS35-HVS Attached 5 meter
power/data cable with bare wire ends. Accepts power from
unregulated high voltage power supplies between 6 and 40 VDC.
Asynchronous serial data interfaces via 2 serial ports with
true RS-232 voltage level outputs.*
- GPS35PC Attached 10 foot
power/data cable with female DB-9 serial connection, ready to
attach to your PC. Additional 8 foot power cable extension
from the DB-9 connector terminates in a cigarette lighter plug
for easy application of power supply voltage between 6 and 40
VDC. Asynchronous serial data interface via a single serial
port with true RS-232 voltage level output.* **
- GPS35 USB, USB connection provides power and data.
*All serial inputs on all versions are compatible with either
true RS-232 or TTL/CMOS voltage levels. Port 1 uses NMEA 0183
data format. Port 2 transmits binary position and raw
measurement data and receives RTCM SC-104 differential
corrections data, message types 1, 2, 3, and 9.
**GPS35PC does not implement Port 2.
|
